This two-day workshop will focus on the installation of an onsite wastewater system based on the flows from the facility being served and the in-situ soils ability to treat and disperse the effluent. A site and soil evaluation day has been held for this property and all necessary information has been gathered.

The system to be installed is a seepage bed with pressure distribution. This system is suitable for the in-situ soils on the property.

Space is limited so save your spot now.

This practical training is sponsored in part by Premier Plastics, Liberty Pumps, and Delta Water Products. 

Install Training Workshop Outcomes

Field Component – installation of all components of an onsite wastewater system including but not limited to:

• Installation of pre-treatment components (Type I or Type II tankage), effluent filter, pump chamber and effluent delivery line.
• Construction of soil treatment component
  • Excavation of site
  • Installation of aggregate
  • Construction and treating of pressure distribution system
  • Construction of monitoring ports
  • Dose settings
  • Testing of the system and final commissioning

Onsite Wastewater System

• Understand basic principles of how onsite wastewater systems work. Apply soil evaluation information and wastewater flows to the design process.
• Learn system design configurations and materials needed to complete installation.
• Basic knowledge of utilizing topography of installation site.
• Know factors in locating the onsite wastewater system– slope vs. level, clearance separations, vertical separations, etc.
• Knowledge of and ability to apply requirements of Standard Practice Manual:
  • Ability to interpret worksheets and design documents
  • Ability to describe construction practices

Register Online | Download a Registration Form